GF 885AE RoughMark™ Cast

2.0 mil gloss white conformable wall vinyl

Grey high-tack removable adhesive

FILM TYPE

Cast White Vinyl

FILM THICKNESS (mils)

2.0

ADHESIVE

Solvent Acrylic

RELEASE LINER

White PE-Coated Kraft, Air Egress

OUTDOOR DURABILITY

Up to 7 years

TECHNICAL DATA SHEET

ficha técnica

GF 885AE RoughMark™ Cast is a 2.0 mil high gloss white cast film coated with a solvent acrylic high-tack removable (HTR) pressure-sensitive adhesive on a 90# air-egress liner. The thick HTR adhesive is designed to aggressively grip onto textured substrates such as brick, block or cement, yet cleanly remove without leaving adhesive residue on the contact surface. The 90# air-egress liner offers excellent product layflat in a variety of ambient conditions, along with ease of application of large format graphics. The GF 885AE accepts a variety of solvent-based, eco-solvent, latex and *UV curable inks common to wide format digital printing systems. *For UV curable inks, please consult with the ink manufacturer for specifics on ink flexibility.

ADDITIONAL RESOURCES

> Sell Sheet

> Vender Hoja

APPLICATIONS

General Signage

POP & Indoor Signage

Windows

Walls

Vehicle Graphics

Transit Advertising

INK COMPATIBILITY

Solvent

Eco-Solvent

Latex

UV Curable

Screen

Offset (UV Curable)

FREQUENTLY ASKED QUESTIONS

Can I use GF 885AE on other surfaces?

GF 885 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use GF 813 gloss clear cast laminate.

Can this product be used on Elevators?

This product is not intended for this application. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces.

When paneling larger jobs, do I use overlaps or butt-seams with this product?

Either is acceptable, although butt-seams require a high degree of skill to line up the panels. Because this product is going on uneven surfaces and is thinner than a normal wall vinyl, an overlap should be the default way to install.